Medicine Processing Spray Dryer 5L Whey Spray Drying Equipment Price

Features for 5L Whey Spray Drying Equipment Price for Spray Dryer :

At a high speed of drying, after the spraying of the material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%~98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.

1. High efficient jet imported.
2. LCD touch screen displays temperature, airflow, air pressure, pump speed and jet cleaner frequency.
3. Manual controlling is available, be able to adjust technical parameters during the process of experiment.
4. With jet cleaner (stylet), its frequency can be automatically adjusted.
5. Build in oil-free air compressor. The sound is low than 60db, and following the GMP standards.
6. Use PID controller, the accuracy of heating temperature is around±1°C.
7. A filter has been equipped to the inlet unit to prevent the sample from contamination.
8. Narrow size distribution, more than 95% of the dry powders are in the same range of particles.
9. Automatic jet cleaner (stylet) prevents the jet from becoming blocked and variably controlled.
10. Innovative tower wall purging device, improves the material recycling rate.

This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, mobility, dissolving capacity. And the final products are high in their purity and good in their quality. The production procedures are simple and the operation and control are easy. The liquid with the moisture contents 40~60% (for special materials, the contents may reach 90%.) can be dried into the powder or particle products once a time. After the drying, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.

It is widely used in drying Beverages, Flavours and Colouring, Milk and Egg Products, Plant and Vegetable Extracts, Pharmaceuticals, Heat sensitive Materials, Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced Materials, Soaps and Detergents, Blood, dyestuffs, Food Stuffs, Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgan and many others.

Working Principle

The air is filtered and heated into the top of the dryer air distributor, hot air into the spiral evenly into the drying chamber. The material liquid is sprayed into a fine atomized liquid droplet through the high-speed centrifugal nebulizer at the top of the tower body, and can be contacted with the hot air in a very short time and can be dried into finished products. The finished product is continuously discharged from the bottom of the drying tower and the cyclone, and the exhaust gas is drained by the draft fan.

Technical specification

If you have special request pls feel free to clik here to contact us !